y PRODUCT CATALOG DEDENBEAR HISTORY RETURN TO WELCOME PAGE EMAIL DEDENBEAR PLACE AN ORDER REQUEST A CATALOG CUSTOMER SUPPORT TECHNICAL LIBRARY Email Dedenbear







 
 
 
 
 
Delay Boxes | Transmissions | Shifter Products | Throttle Stops
Throttle Stop Controllers
| Cooling Systems | CO2 Components
Accessories
| ET Displays |
Nitrous Oxide Controller
| Off Road Products | Instructions/Wiring
 
  • Dual 3/4 inch NPT threads let coolant feed from either side of the engine
  • Designed to distribute coolant equally into both sides of the engine.
  • Top mounted 1/2 inch NPT outlet accepts a temperature sending gauge, switch or pressure tap
  • Lightweight castings designed with our WP3 water pump to perform as an engineered cooling system
  • Compatible with other types of remote mounted water pump
WH1 & WH2

Dedenbear's innovative water header replaces the usual mess of fittings, lines, elbows and tees with a single aluminum casting that weighs only 1 pound - and requires just one braided line from any remote pump. Perfect for dragster and roadster applications in which clearance is limited, our exclusive design permits the utilization of alternators or belt driven fuel pumps without water pump interference. Its tall, arched shape allows removal of the cam cover and camshaft without disconnecting the cooling system.

Back to Top

EXPANSION TANK KIT
ET1K

MANIFOLD EXPANSION TANK KIT This revolutionary device improves any existing cooling system by continuously purging trapped air. The rugged aluminum casting bolts onto any Chevy or Chrysler V8 intake manifold.

Model ET1K - Includes: Cap, Gasket, Bolts, Washers, Fittings and Sight Tube

  • Our unique, three-in-one outlet accepts all popular hose designs: 1-1/2-inch; 1-1/4-inch; or 3/4-inch pipe thread for AN fittings.
  • Machined, thick aluminum top which won't wear out like a thin sheet metal neck.
  • Uses a standard radiator cap.
  • External sight gauge on the side allows visual checks of coolant levels.
  • Coolant can be circulated with the cap removed - without overflowing.
  • Threaded bosses on each side provide convenient locations to attach hood scoop supports, throttle return springs, etc.
  • Catch-can line provision is built right into the neck.
BLEED VALVE
Originally designed for Dedenbear water pumps, this device can be used to quickly and cleanly bleed air from any cooling system. Special oil and gas resistant seal allows the BV1 to vent air from any gearbox, dry sump tank, or other low pressure application. No tools are required; simply press the button to relieve pressure, then release the button. Brass body and stainless-steel spring and snap ring prevent corrosion. Fits 1/8 inch NPT thread.
UP

BV1

UP